OneXPlayer has opened funding for the OneXPlayer 3, a modular handheld built around Intel Arc B390 graphics and Windows 11, with pricing that starts at $1399. The pitch is simple: undercut some premium rivals on price, then try to win on display quality, flexibility, and a few very shiny extras.

That’s a reasonable play. The OneXPlayer 3 enters a handheld PC market where screen quality, battery size, and controller tricks now matter almost as much as raw silicon, and OneXPlayer is leaning hard into the parts buyers can actually see.

OneXPlayer 3 price and configurations

The base model costs $1399 and includes 24 GB of RAM and 512 GB of storage. One step up, the version with 24 GB of RAM and 1 TB of storage is priced at $1499, while the top configuration with 32 GB of RAM and 1 TB of storage reaches $1699.

  • $1399: 24 GB RAM, 512 GB storage
  • $1499: 24 GB RAM, 1 TB storage
  • $1699: 32 GB RAM, 1 TB storage

The campaign is running on Indiegogo, and early backers get a controller connector, a magnetic keyboard, and a protective case. That bundle is doing a lot of work here; without it, the entry price looks even more aggressive next to similar high-end handhelds.

OneXPlayer 3 display is the real selling point

OneXPlayer’s best card is the screen. The OneXPlayer 3 uses an 8.8-inch AMOLED panel with a 1920 × 1200 resolution, HDR support, full DCI-P3 coverage, a 144 Hz refresh rate, and a peak brightness of 1100 cd/m2.

That puts it ahead of the MSI Claw 8 AI+ in this comparison, which relies on an 8-inch IPS panel with the same resolution but a 120 Hz refresh rate. The MSI machine still starts at a higher price and uses the same general chip class, so OneXPlayer is clearly trying to make the display the reason to choose it.

Memory speeds and battery details

The RAM configuration is not identical across versions. The 24 GB model uses memory rated at 7467 MT/s, while the 32 GB version gets faster 8533 MT/s memory.

Other hardware details round out the spec sheet: an 85 Wh battery, a cooling system with an 11,203 mm2 vapor chamber and a 16,644 mm2 aluminum heatsink, plus a 35 W full-power mode. For a device that wants to behave like a handheld, tablet, laptop, and PC, that cooling setup will matter more than the marketing says.

Modular modes and the MSI comparison

OneXPlayer says the device can switch between handheld, tablet, laptop, and desktop-style use, thanks to detachable controllers and the magnetic keyboard. It is the kind of feature list that sounds like overkill until you remember how often gaming handhelds end up sitting on a desk pretending to be something else.

On price alone, the OneXPlayer 3 base model lands about $300-400 below the MSI Claw 8 AI+ in the same chip class, though MSI’s configuration comes with 32 GB of RAM and 1 TB of storage. OneXPlayer is betting that a better panel and lower entry cost will outweigh the usual ”buy the known brand” instinct. That could work – especially if performance lands where the specs suggest – but the first buyers are still signing up for a crowdfunding launch, not a retail certainty.

Source: 3dnews

Leave a comment

Your email address will not be published. Required fields are marked *